HFE 1703S is a 187 ton, down-acting hydraulic press brake with a bed
length of 10 feet. There are 148" between the frames, with an open height of
17.7". The maximum travel distance of the ram is 7.0", and the maximum bend
length that can be formed is 171". The ram repeatability is 0.0004", while
the backgauge can travel 27.5".
The HFE 1703S has an Operateur CNC control, which is used to control the
ram and backgauge, as well as other appropriate functions. The control has the
ability to program the machine in either GRAPHICS Mode, ANGLE Mode, DEPTH Mode
or to reverse the ram based on tonnage. The HFE 1703S also features a 16"
throat, sectionalized punch holders with fast release clamp, a larger brake
for staging a variety of complex parts, a foot pedal, and a hand wheel.
System Specifications
Press Brake
Capacity: 187 U.S. tons
Bed Length: 122 inches
Maximum Stroke Length: 7.8 inches
Open Height: 18.5 inches
Throat Depth: 16.5 inches
Distance Between Side Frames: 106 inches
Ram Repeatability: +/- 0.0004 inches
Advance Speed: 472 IPM
Press Speed: 2 - 47 IPM
Return Speed: 2.4 - 472 IPM
Overall Weight: 25,520 lbs.
Overall Dimensions: 14' L x 8' W x 9'6" H
Machine Power: 27.5 KW
Foundation: 6 inch concrete slab
Backgauge
Model
Amada Type B
Repeatability: X Axis +/- 0.0004 inches
Movement Range
X Axis 27.5/37.5 inches
R Axis 9.84 inches
Z Axis 137 inches
Feed Speed
X Axis 19.5 inches per second
R Axis 6.2 inches per second
Z Axis 39.3 inches per second.
Gripper jaws can reduce the risk of the part being torn out under high machining forces. The penetrating tips produce a very high holding force even at low clamping force.
The Kitagawa BR series is a large bore three jaw chuck, when coupled with T-nuts Plus a T.I.R of 0.01mm or less can be maintained to reduce setup times. The BR series are supplied with a blank drawnut, Set of Soft Jaws and a set of standard T-nuts as...
